In message <[EMAIL PROTECTED]> you wrote:
>
> Thanks so much for your reply and candor - that's kind of
> what I needed to hear either way.
Well, it would have been much beter if the reply had been sent to the
ML so others could have commented on it.
> --- Andrew Dyer <[EMAIL PROTECTED]> wrote:
>
> > I would guess it would be easier to add code to boot from ATA to
> > pmon-2000 (never used the -2000 version, just the old pmon a ong time
> > ago) than to do a new port to something not supported (u-boot for mips
Well, if you have a working port for one boot loader which you can
look at for init code etc. then coming up with a port of U-Boot is not
that hard.
> > is not in the best of shape). That being said, we boot a
There is a number of MIPS board that are working pretty well -
Andrew: what exactly do you mean by "not in the best of shape"?
> > Raza Au1550
> > MIPS using u-boot off of CF. I believe the s/w guys are
> > using ext2
> > on the CF instead of vfat, but it does work.
Seems to work for you?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
That Microsoft, the Trabant of the operating system world, may be
glancing over the Berlin Wall at the Audis and BMWs and Mercedes. In
their own universe Trabants and Ladas were mainstream too...
-- Evan Leibovitch
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users