> "U-Boot > ext2load mmc 0:1 21500000 vmImage" > Next, many "." appear on the console while the image is not > totally load on the SDRam. I don't want print this dot. So > how can I disable this?
The mmc_bread() routine in ./cpu/*/*/atmel_mci.c contains putc('.'); You probably want to comment out or remove this line. Cheers, Ken Fuchs > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Pierre Savary > Sent: Monday, February 18, 2008 09:38 > To: U-Boot-Users > Subject: [U-Boot-Users] disable "." when ext2load > > > Hi all, > > I use U-Boot 1.1.5 to load my Linux kernel. The image of this > kernel is on a > MMC. So, I make > "U-Boot > mmcinit" > and after I make > "U-Boot > ext2load mmc 0:1 21500000 vmImage" > Next, many "." appear on the console while the image is not > totally load on > the SDRam. I don't want print this dot. So how can I disable > this? I have > already search "printf (".");" or "puts (".");" or others > things ... but I > have not found where is this line on the source code ... > > Could you help me please? > Thanks in advance > > Pierre > > > -------------------------------------------------------------- > ----------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users