Hi,
Currently I am testing the RMII ethernet functionality on the MPC8272ADS
board.
I need help........
I want you to validate my modifications for RMII mode on the ADS board after
setting jumpers JP5 & JP10 accordingly.
Modifications to U-Boot-1.3.2-rc1:
Currently FCC_ETHER_INDEX = 1:
/include/configs/MPC8272ADS.h -->
#define CONFIG_ADSTYPE CFG_8260ADS
to
#define CONFIG_ADSTYPE CFG_8272ADS
&
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */
to
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB | FCC_PSMR_RMII) /* Full
duplex & RMII mode*/
/board/mpc8260ads/mpc8260ads.c -->
miiphy_write(CFG_PHY_ADDR, 16, 0x610);
to
miiphy_write(CFG_PHY_ADDR, 16, 0x710);
Is there something I am missing ? after executing the above mentioned
changes ping stopped working ("host not alive")...
MII mode worked fine on the same board.
Kindly suggest, if more changes would be required.
Regds.
John
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
