Hi Markus, On Saturday 01 March 2008, Markus Klotzbücher wrote: > >> Glancing over the patch I fail to see what hardware and configuration > >> you are using for your development. Can you enlighten us on this? > > > > Ah, good point. This driver was developed for the Philips ISP156x. > > The configuration is derived from the MPC8555 configuration. It's a > > customer board, so there's no way for me to point to some URL... > > Are there any plans at this point for merging the support for this > board? I'd really like to merge this driver, but on the other hand it > make little sense until there code that actually uses it!
We have other boards with EHCI support that could be used for testing (e.g. Sequoia). But the original board where it is know to work would be best of course. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
