1. Make the CSB bus pipeline depth as 4, and enable
the repeat mode;
2. Raise the eTSEC emergency priority;
3. Use the highest IP blocks clock.
Signed-off-by: Dave Liu <[EMAIL PROTECTED]>
---
include/configs/MPC837XEMDS.h | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 61de084..2222ef2 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -84,11 +84,19 @@
HRCWH_LDP_CLEAR)
#endif
+/* Arbiter Configuration Register */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
+
+/* System Priority Control Register */
+#define CFG_SPCR_TSECEP 3 /* eTSEC1/2 emergency has
highest priority */
+
/*
- * eTSEC Clock Config
+ * IP blocks clock configuration
*/
#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */
#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */
+#define CFG_SCCR_SATACM SCCR_SATACM_1 /* CSB:SATA[0:3] = 1:1
*/
/*
* System IO Config
--
1.5.4.rc4
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
