Hi, Øyvind. 2008/3/5, Øyvind Repvik <[EMAIL PROTECTED]>: > Hi, > I'm trying to get a recent u-boot running properly on a QNAP > TurboStation TS-101/TS-201, and I'm having problems with the network > driver. When powered on, the device refuses to send anything to the > network on the first attempt (eg. first ping fails). The second and > subsequent attempts however, works perfectly. > > With debugging switched on, the driver outputs the expected init output, > but on the first attempt appears to loop on "rtl_recv", outputting this > hundreds of times. (I don't have a debug log handy right now, but the > only difference is that instead of *one* rtl_recv, there are hundreds) > On the second attempt, there's only one rtl_recv. > > Anyone got a clue as to what is going on? > I'm using the attached patch to correct endianness issues and add device > IDs. >
The patch that you wrote already exists in U-boot. Please check latest source code. regards, Nobuhiro -- ---------------------------------- Nobuhiro Iwamatsu ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
