On Thursday 06 March 2008, Wolfgang Denk wrote: > In message <[EMAIL PROTECTED]> you wrote: > > I do like such a progress output. But printing each KB seems a little > > too much from my point of view. Could even slow down the programming > > because of the slow serial output on some systems. > > I agree that a counter is overkill.
You misunderstood me. I like this kind of output (kB or % programmed). It's just that the York's version printed one line per kByte. This seems too much. My version is simpler and prints only 1 line per 16 kByte. We can change to 32k or even more. > I suggest we continue to do what we've been doing in other flash > access routines (like many of the earlier custom drivers), i. e. > print out dots, approximately one per second. Fine with me too. Even though I would prefer to switch this progress output on all FLASH access routines to something like % too. This way we have an idea how long this operation it is going to last. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
