On 12:28 Fri 21 Mar , Pieter Voorthuijsen wrote:
>
> 2nd try, previous one was wrapped:
> Double checked spaces and coding style...
>
> Original message:
>
> Hello,
>
>+ * You should have received a copy of the GNU General Public License
>+ * along with this program; if not, write to the Free Software
>+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>+ * MA 02111-1307 USA
>+ */
>+
>+/* This code sets up the timing params for EMIF CE2 and CE3 which
>+ * connect to NOR and NAND flash
^
Whitespace please remove
>+ */
Please use this style of comment
/*
* ....
* ....
*/
>+
^
Whitespace please remove
>#include <config.h>
>
>.globl dv_board_init
>dv_board_init:
>
>extern void timer_init(void);
>extern int eth_hw_init(void);
>extern phy_t phy;
>
>
please remove, only one emply line
>/* Works on Always On power domain only (no PD argument) */
>void lpsc_on(unsigned int id)
>{
> /* Enable EMAC and AEMIF pins */
> REG(PINMUX0) = 0x80000c1f;
>
> /* Enable I2C pin Mux */
> REG(PINMUX1) |= (1 << 7);
>
> /* Set the Bus Priority Register to appropriate value */
> REG(VBPR) = 0x20;
>
> timer_init();
>
> return(0);
>}
>
>int misc_init_r (void)
>{
> int clk = 0;
>
> clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
>
> printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
> printf ("DDR Clock : %dMHz\n", (clk / 2));
>
> if (!eth_hw_init())
> printf("ethernet init failed!\n");
> else
> printf("ETH PHY : %s\n", phy.name);
>
>
please remove, only one emply line
> return(0);
>}
>
Best Regards,
J.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
