On Tue, 25 Mar 2008 18:36:47 +0100 Andre Schwarz <[EMAIL PROTECTED]> wrote:
> All, > > has anyone set up the DDR-II controller on a Freescale MPC8343A without ? without what? > As far as I can see there are only DDR-I boards from Freescale. > The MDS can do ddr2: U-Boot 1.3.2-00097-gbc508d1 (Mar 25 2008 - 10:47:17) MPC83XX Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c1, MPC8349E, Rev: 30 at 528 MHz, CSB: 264 MHz Board: Freescale MPC8349EMDS I2C: ready SPI: ready DRAM: 256 MB (DDR2, 64-bit, ECC on) ... > Are there any patches not yet posted to handle this ? > should work, only diff I see is that the 8343 is 32-bit only. Kim ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users