Hello Wolfgang,

This patch adds support for the LEON3 simulators TSIM and GRSIM.

The simulators GRSIM and TSIM for LEON3 has been added as a board.
A separate board is needed due to that the FLASH CFI interface
has not been implemented in the simulators. Configuring the
GR-XC3S-1500 board without FLASH support should run in the simulator.

This patch is also available at 
ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.

Best Regards,
Daniel Hellstrom



 MAKEALL                        |    2 +-
 Makefile                       |    4 +
 board/gaisler/grsim/Makefile   |   50 ++++++
 board/gaisler/grsim/config.mk  |   34 ++++
 board/gaisler/grsim/grsim.c    |   43 +++++
 board/gaisler/grsim/u-boot.lds |  161 +++++++++++++++++++
 include/configs/grsim.h        |  340 
++++++++++++++++++++++++++++++++++++++++
 7 files changed, 633 insertions(+), 1 deletions(-)


diff --git a/MAKEALL b/MAKEALL
index dc11ed8..d31addf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -714,7 +714,7 @@ LIST_sh="        \
 ## SPARC Systems
 #########################################################################
 
-LIST_sparc="gr_xc3s_1500"
+LIST_sparc="gr_xc3s_1500    grsim"
 
 #-----------------------------------------------------------------------
 
diff --git a/Makefile b/Makefile
index 99811aa..27e480f 100644
--- a/Makefile
+++ b/Makefile
@@ -2866,6 +2866,10 @@ ms7722se_config :    unconfig
 gr_xc3s_1500_config : unconfig
     @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
 
+# Gaisler LEON3 GRSIM simulator
+grsim_config : unconfig
+    @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
+
 #########################################################################
 ## LEON2
 #########################################################################
diff --git a/board/gaisler/grsim/Makefile b/board/gaisler/grsim/Makefile
new file mode 100644
index 0000000..6295109
--- /dev/null
+++ b/board/gaisler/grsim/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, [EMAIL PROTECTED]
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS    := $(BOARD).o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS))
+SOBJS    := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):    $(obj).depend $(OBJS)
+    $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+    rm -f $(SOBJS) $(OBJS)
+
+distclean:    clean
+    rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gaisler/grsim/config.mk b/board/gaisler/grsim/config.mk
new file mode 100644
index 0000000..81cd415
--- /dev/null
+++ b/board/gaisler/grsim/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, [EMAIL PROTECTED]
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GRSIM simulating a LEON3 GR-XC3S-1500 board
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN RAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/gaisler/grsim/grsim.c b/board/gaisler/grsim/grsim.c
new file mode 100644
index 0000000..70a2f23
--- /dev/null
+++ b/board/gaisler/grsim/grsim.c
@@ -0,0 +1,43 @@
+/* GRSIM/TSIM board
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, [EMAIL PROTECTED]
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+    return 1;
+}
+
+int checkboard(void)
+{
+    puts("Board: GRSIM/TSIM\n");
+    return 0;
+}
+
+int misc_init_r(void)
+{
+    return 0;
+}
diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds
new file mode 100644
index 0000000..1e8bb69
--- /dev/null
+++ b/board/gaisler/grsim/u-boot.lds
@@ -0,0 +1,161 @@
+/* Linker script for Gaisler Research AB's GRSIM LEON3 simulator.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, [EMAIL PROTECTED]
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+    . = + SIZEOF_HEADERS;
+    .interp : { *(.interp) }
+    .hash          : { *(.hash) }
+    .dynsym        : { *(.dynsym) }
+    .dynstr        : { *(.dynstr) }
+    .rel.text      : { *(.rel.text) }
+    .rela.text     : { *(.rela.text) }
+    .rel.data      : { *(.rel.data) }
+    .rela.data     : { *(.rela.data) }
+    .rel.rodata    : { *(.rel.rodata) }
+    .rela.rodata   : { *(.rela.rodata) }
+    .rel.got       : { *(.rel.got) }
+    .rela.got      : { *(.rela.got) }
+    .rel.ctors     : { *(.rel.ctors) }
+    .rela.ctors    : { *(.rela.ctors) }
+    .rel.dtors     : { *(.rel.dtors) }
+    .rela.dtors    : { *(.rela.dtors) }
+    .rel.bss       : { *(.rel.bss) }
+    .rela.bss      : { *(.rela.bss) }
+    .rel.plt       : { *(.rel.plt) }
+    .rela.plt      : { *(.rela.plt) }
+    .init          : { *(.init) }
+    .plt : { *(.plt) }
+
+    .text : {
+        _load_addr = .;
+        _text = .;
+
+        *(.start)
+        cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, 
(CFG_PROM_SIZE) */
+        . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+        __prom_start = .;
+        *(.prom.pgt)
+        *(.prom.data)
+        *(.prom.text)
+        . = ALIGN(16);
+        __prom_end = .;
+        *(.text)
+        *(.fixup)
+        *(.gnu.warning)
+/*        *(.got1)*/
+        . = ALIGN(16);
+        *(.rodata)
+        *(.rodata1)
+        *(.rodata.*)
+        *(.eh_frame)
+    }
+    . = ALIGN(4);
+    _etext = .;
+
+    /* CMD Table */
+
+    __u_boot_cmd_start = .;
+    .u_boot_cmd : { *(.u_boot_cmd) }
+    . = ALIGN(4);
+    __u_boot_cmd_end = .;
+
+    .data    :
+    {
+        *(.data)
+        *(.data1)
+        *(.data.rel)
+        *(.data.rel.*)
+        *(.sdata)
+        *(.sdata2)
+        *(.dynamic)
+        CONSTRUCTORS
+    }
+    _edata    =    .;
+    PROVIDE (edata = .);
+
+    . = ALIGN(4);
+    __got_start = .;
+    .got : {
+        *(.got)
+/*        *(.data.rel)
+        *(.data.rel.local)*/
+        . = ALIGN(16);
+    }
+    __got_end = .;
+
+/*    .data.rel : { } */
+
+
+    . = ALIGN(4096);
+    __init_begin = .;
+    .text.init : { *(.text.init) }
+    .data.init : { *(.data.init) }
+    . = ALIGN(4096);
+    __init_end = .;
+
+    __bss_start = .;
+    .bss    :
+    {
+     *(.sbss) *(.scommon)
+     *(.dynbss)
+     *(.bss)
+     *(COMMON)
+    . = ALIGN(16); /* to speed clearing of bss up */
+    }
+    __bss_end = . ;
+    _end = . ;
+    PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+    /* Start of main memory */
+    /*. = 0x40000000;*/
+
+    .stack (NOLOAD)    : { *(.stack) }
+
+    /* PROM CODE */
+
+    /* global data in RAM passed to kernel after booting */
+
+
+    .stab 0        : { *(.stab) }
+    .stabstr 0        : { *(.stabstr) }
+    .stab.excl 0        : { *(.stab.excl) }
+    .stab.exclstr 0    : { *(.stab.exclstr) }
+    .stab.index 0        : { *(.stab.index) }
+    .stab.indexstr 0    : { *(.stab.indexstr) }
+    .comment 0        : { *(.comment) }
+
+}
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
new file mode 100644
index 0000000..60ad396
--- /dev/null
+++ b/include/configs/grsim.h
@@ -0,0 +1,340 @@
+/* Configuration header file for LEON3 GRSIM, trying to be similar
+ * to Gaisler's GR-XC3S-1500 board.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, [EMAIL PROTECTED]
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, [EMAIL PROTECTED]
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.     See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ *
+ * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM 
to 1.
+ *
+ * TSIM command
+ *  tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
+ *
+ */
+
+#define CONFIG_LEON3            /* This is an LEON3 CPU */
+#define CONFIG_LEON        1    /* This is an LEON CPU */
+#define CONFIG_GRSIM        0    /* ... not running on GRSIM */
+#define CONFIG_TSIM        1    /* ... running on TSIM */
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ     40000000    /* 40MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE        38400    /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE    { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_CMD_AMBAPP    /* AMBA Plyg&Play information   */
+#define CONFIG_CMD_AUTOSCRIPT    /* Autoscript Support           */
+#define CONFIG_CMD_BDI        /* bdinfo                       */
+#define CONFIG_CMD_CONSOLE    /* coninfo                      */
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ECHO        /* echo arguments               */
+#define CONFIG_CMD_FPGA        /* FPGA configuration Support   */
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ITEST    /* Integer (and string) test    */
+#define CONFIG_CMD_LOADB    /* loadb                        */
+#define CONFIG_CMD_LOADS    /* loads                        */
+#define CONFIG_CMD_MISC        /* Misc functions like sleep etc */
+#define CONFIG_CMD_NET        /* bootp, tftpboot, rarpboot    */
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_RUN        /* run command in env variable  */
+#define CONFIG_CMD_SETGETDCR    /* DCR support on 4xx           */
+#define CONFIG_CMD_XIMG        /* Load part of Multi Image     */
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY    5    /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT    "echo;"    \
+    "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+    "echo"
+
+#undef    CONFIG_BOOTARGS
+/*#define CFG_HUSH_PARSER 0*/
+#ifdef    CFG_HUSH_PARSER
+#define    CFG_PROMPT_HUSH_PS2    "> "
+#endif
+
+#define    CONFIG_EXTRA_ENV_SETTINGS                    \
+    "netdev=eth0\0"                            \
+    "nfsargs=setenv bootargs root=/dev/nfs rw "            \
+        "nfsroot=${serverip}:${rootpath}\0"            \
+    "ramargs=setenv bootargs root=/dev/ram rw\0"            \
+    "addip=setenv bootargs ${bootargs} "                \
+        "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"    \
+        ":${hostname}:${netdev}:off panic=1\0"            \
+    "flash_nfs=run nfsargs addip;"                    \
+        "bootm ${kernel_addr}\0"                \
+    "flash_self=run ramargs addip;"                    \
+        "bootm ${kernel_addr} ${ramdisk_addr}\0"        \
+    "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"    \
+    "rootpath=/export/roofs\0"                    \
+    "scratch=40000000\0"                    \
+    "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+    "ethaddr=00:00:7A:CC:00:12\0" \
+    "bootargs=console=ttyS0,38400" \
+    ""
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.81
+#define CONFIG_IPADDR 192.168.0.80
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME  grxc3s1500
+#define CONFIG_BOOTFILE  /uImage
+
+#define CONFIG_BOOTCOMMAND    "run flash_self"
+
+/* Memory MAP
+ *
+ *  Flash:
+ *  |--------------------------------|
+ *  | 0x00000000 Text & Data & BSS   | *
+ *  |            for Monitor         | *
+ *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ *  | UNUSED / Growth                | * 256kb
+ *  |--------------------------------|
+ *  | 0x00050000 Base custom area    | *
+ *  |            kernel / FS         | *
+ *  |                                | * Rest of Flash
+ *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ *  | END-0x00008000 Environment     | * 32kb
+ *  |--------------------------------|
+ *
+ *
+ *
+ *  Main Memory:
+ *  |--------------------------------|
+ *  | UNUSED / scratch area          |
+ *  |                                |
+ *  |                                |
+ *  |                                |
+ *  |                                |
+ *  |--------------------------------|
+ *  | Monitor .Text / .DATA / .BSS   | * 256kb
+ *  | Relocated!                     | *
+ *  |--------------------------------|
+ *  | Monitor Malloc                 | * 128kb (contains relocated 
environment)
+ *  |--------------------------------|
+ *  | Monitor/kernel STACK           | * 64kb
+ *  |--------------------------------|
+ *  | Page Table for MMU systems     | * 2k
+ *  |--------------------------------|
+ *  | PROM Code accessed from Linux  | * 6kb-128b
+ *  |--------------------------------|
+ *  | Global data (avail from kernel)| * 128b
+ *  |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at  0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ *               0xFE000000 for 32 MB
+ *               0xFF000000 for 16 MB
+ *               0xFF800000 for  8 MB
+ */
+#define CFG_NO_FLASH        1
+#define CFG_FLASH_BASE        0x00000000
+#define CFG_FLASH_SIZE        0x00800000
+#define CFG_ENV_SIZE        0x8000
+
+#define CFG_ENV_ADDR        (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SIZE)
+
+#define PHYS_FLASH_SECT_SIZE    0x00020000    /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT    64    /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS    1    /* max num of memory banks      */
+
+#define CFG_FLASH_ERASE_TOUT    240000    /* Flash Erase Timeout (in 
ms)  */
+#define CFG_FLASH_WRITE_TOUT    500    /* Flash Write Timeout (in ms)  */
+#define CFG_FLASH_LOCK_TOUT    5    /* Timeout for Flash Set Lock Bit 
(in ms) */
+#define CFG_FLASH_UNLOCK_TOUT    10000    /* Timeout for Flash Clear 
Lock Bits (in ms) */
+
+#ifdef ENABLE_FLASH_SUPPORT
+/* For use with grsim FLASH emulation extension */
+#define CFG_FLASH_PROTECTION    /* "Real" (hardware) sectors protection */
+
+#undef CONFIG_FLASH_8BIT    /* Flash is 32-bit */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH    FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#endif
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_NOWHERE 1
+/*#define CFG_ENV_IS_IN_FLASH    0*/
+/*#define CFG_ENV_SIZE        0x8000*/
+#define CFG_ENV_SECT_SIZE    0x40000
+#define CONFIG_ENV_OVERWRITE    1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE        0x40000000
+#define CFG_SDRAM_SIZE        0x02000000
+#define CFG_SDRAM_END        (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+/* Always Run U-Boot from SDRAM */
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE    128    /* size in bytes reserved for 
initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE        (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET        (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET    (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE        (0x10000-32)
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT        1
+#endif
+
+#define CFG_MONITOR_LEN        (256 << 10)    /* Reserve 256 kB for 
Monitor   */
+#define CFG_MALLOC_LEN        (128 << 10)    /* Reserve 128 kB for 
malloc()  */
+#define CFG_BOOTMAPSZ        (8 << 20)    /* Initial Memory map for 
Linux */
+
+#define CFG_MALLOC_END        (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE        (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE     
(CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_GRETH    1
+#define CONFIG_NET_MULTI    1
+
+/* Default HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7A
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x12
+
+#define CONFIG_ETHADDR   00:00:7a:cc:00:12
+
+/*
+ * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
+ */
+/* #define CONFIG_GRETH_10MBIT 1 */
+#define CONFIG_PHY_ADDR        0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP        /* undef to save memory     */
+#define CFG_PROMPT        "=> "    /* Monitor Command Prompt   */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE        1024    /* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE        256    /* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)    /* Print 
Buffer Size */
+#define CFG_MAXARGS        16    /* max number of command args   */
+#define CFG_BARGSIZE        CFG_CBSIZE    /* Boot Argument Buffer 
Size    */
+
+#define CFG_MEMTEST_START    0x00100000    /* memtest works on */
+#define CFG_MEMTEST_END        0x00f00000    /* 1 ... 15 MB in DRAM  */
+
+#define CFG_LOAD_ADDR        0x100000    /* default load address */
+
+#define CFG_HZ            1000    /* decrementer freq: 1 ms ticks */
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM     0
+#define CFG_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
+#if CONFIG_GRSIM
+/* GRSIM configuration */
+#define CFG_GRLIB_MEMCFG2   0x82206000
+#else
+/* TSIM configuration */
+#define CFG_GRLIB_MEMCFG2   0x00001820
+#endif
+#define CFG_GRLIB_MEMCFG3   0x00136000
+
+#define CFG_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
+#define CFG_GRLIB_FT_MEMCFG2   0x82206000
+#define CFG_GRLIB_FT_MEMCFG3   0x00136000
+
+/* no DDR controller */
+#define CFG_GRLIB_DDR_CFG   0x00000000
+
+/* no DDR2 Controller */
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#define CONFIG_IDENT_STRING "Gaisler GRSIM"
+
+#endif                /* __CONFIG_H */


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to