On Mon, Mar 31, 2008 at 1:13 PM, Stefan Roese <[EMAIL PROTECTED]> wrote:
<snip>
> > > I'm not really sure if this is true though since Taihu is using
> > > gpio_set_chip_configuration() without known problems. Could you please
> > > re-check with AMCC support, if this statement for 405EP is correct? If
> > > this pin assignment of the 405EP GPIO block is incompatible with other
> > > GPIO cores, like the one on 440EP or 405EX.
> >
> > I will do.
> > All ppc405 which used the CFG_GPIO0_*{H,L} defines in their config
> > file were using the "wrong" address.
>
> No. 405EX & 405EZ which were added recently are using the correct addresses.
Right, this was a typo. I meant all 405EP are using the wrong addr.
405GP doesn't have H/L registers
Best Regards
Markus
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
