Andy Fleming wrote: > The fdt set command was treating properties specified as <00> and <0011> > as byte streams, rather than as an array of cells. As we already have > syntax for expressing the desire for a stream of bytes ([ xx xx ...]), > we should use the <> syntax to describe arrays of cells, which are always > 32-bits per element. If we imagine this likely (IMHO) scenario: > >> fdt set /[EMAIL PROTECTED] reg <1> > > With the old code, this would create a bad fdt, since the reg cell would be > made to be one byte in length. But the cell must be 4 bytes, so this would > break mysteriously.
Confirmed, my bad. Applied to the u-boot-fdt repo. Thanks, gvb ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
