On 4/3/2008, "Andre Schwarz" <[EMAIL PROTECTED]> wrote:
>All,
Hi Andre and others,
>currently I'm trying to bring up a mpc8343 based system.
>Latest u-boot v1.3.2 is running fine.
>
>The MPC8343 has a single 32-Bit PCI Bus running at 66MHz.
>Connected are a FPGA (IDSEL 11 + IRQ0) and a miniPCI Slot (IDSEL12 +
>IRQ1).
>
>Unfortunately the kernel panics during/after PCI setup.
Not sure if this is related. But i got strange problems with PCI after
the patch "Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
(55774b512fdf63c..) was added.
My symptoms where missed interrupts on sata dma in Linux. U-boot where
however fine. Adding the above config solved my problems. Not really
sure why i experienced this. We have no PCI bridge on our board.
/Tor
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
