On Thu, Apr 17, 2008 at 05:49:24AM +0200, Jean-Christophe PLAGNIOL-VILLARD 
wrote:
> On 18:46 Wed 16 Apr     , Rodolfo Giometti wrote:
> > Hello,
> > 
> > Using a 1GB CF on my system I get:
> > 
> >    equantum> pinit on
> >    KINGSTON CF CARD 1GB
> >                Fixed Disk Card
> >                IDE interface 
> >                [silicon] [unique] [single] [sleep] [standby] [idle] [low 
> > power]
> >    equantum> ide reset
> > 
>  Could you gice more information about your environment : u-boot
>  version, hard init, etc...

Yes, sorry. u-boot version 1.2.0 running on PXA270 based board.

What do you mean by "hard init"? The GPIOs settings or so?

>  And also could specify the Voltage of the Flash that you use 3.3V, 5V,
>  3.3/5V.

The voltage is 3.3.

Thanks for your help,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    [EMAIL PROTECTED]
Linux Device Driver                             [EMAIL PROTECTED]
Embedded Systems                     phone:     +39 349 2432127
UNIX programming                     skype:     rodolfo.giometti

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to