Hi,

Does U-Boot support USB Slave mode ?

I have an ARM926EJS board with USB-OTG. I can configure it in USB Slave mode
using some register settings.
But I need to run U-Boot on top of it so that I can access the USB Slave
functionality.

Kindly suggest how I can use U-Boot in USB Slave mode and what configuration
changes are required ?

Thanks in Advance.

Regards,
Neeraj


The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments contained in it.

Contact your Administrator for further information.


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to