On Tue, Apr 22, 2008 at 12:55 PM, Larry Johnson <[EMAIL PROTECTED]> wrote:
> Hi Stefan,
>
> Currently, I can build "zImage" for Sequoia using the powerpc
> architecture, and load it using U-Boot without a separate FDT binary.
> Is this the best way to run a Linux from the powerpc tree?
Sorry, I don't understand what you're asking.
There are two way to boot a Linux image from arch/powerpc.
1) build a uImage and get u-boot to pass a device tree blob (if your u-boot
had device tree support)
2) build a cuImage which wraps the device tree in the kernel image.
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
