Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.
Signed-off-by: Andre Schwarz <[EMAIL PROTECTED]>
--
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht:
Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
CREDITS | 5 +++
MAINTAINERS | 4 ++
MAKEALL | 1 +
Makefile | 3 ++
doc/README.mvblm7 | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 98 insertions(+), 0 deletions(-)
diff --git a/CREDITS b/CREDITS
index e84ef38..713f58a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -424,6 +424,11 @@ N: Paolo Scaffardi
E: [EMAIL PROTECTED]
D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots
more
+N: Andre Schwarz
+E: [EMAIL PROTECTED]
+D: Support for BlueLYNX and BlueCOUGAR series
+W: www.matrix-vision.com
+
N: Robert Schwebel
E: [EMAIL PROTECTED]
D: Support for csb226, logodl and innokom boards (PXA2xx)
diff --git a/MAINTAINERS b/MAINTAINERS
index 58f833c..7d0d1b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -367,6 +367,10 @@ Peter De Schrijver <[EMAIL PROTECTED]>
ML2 PPC4xx
+Andre Schwarz <[EMAIL PROTECTED]>
+
+ mvblm7 MPC8343
+
Timur Tabi <[EMAIL PROTECTED]>
MPC8349E-mITX MPC8349
diff --git a/MAKEALL b/MAKEALL
index 791eabc..7bf8e52 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -329,6 +329,7 @@ LIST_83xx=" \
MPC8360ERDK_66 \
MPC837XEMDS \
MPC837XERDB \
+ MVBLM7 \
sbc8349 \
TQM834x \
"
diff --git a/Makefile b/Makefile
index 167a717..0535c0b 100644
--- a/Makefile
+++ b/Makefile
@@ -2096,6 +2096,9 @@ MPC837XEMDS_HOST_config: unconfig
MPC837XERDB_config: unconfig
@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+MVBLM7_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
diff --git a/doc/README.mvblm7 b/doc/README.mvblm7
new file mode 100644
index 0000000..fb86b5a
--- /dev/null
+++ b/doc/README.mvblm7
@@ -0,0 +1,85 @@
+Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
+-------------------------------------
+
+1. Board Description
+
+ The mvBL-M7 is a 120x120mm single board computing platform
+ with strong focus on stereo image processing applications.
+
+ Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
+ on any port (requires add-on board).
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
+ 512MByte DDR-II memory @ 133MHz.
+ 8 MByte Nor Flash on local bus.
+ 2 Vitesse VSC8601 RGMII ethernet Phys.
+ 1 USB host controller over ULPI I/F.
+ 2 serial ports. Console running on ttyS0 @ 115200 8N1.
+ 1 SD-Card slot connected to SPI.
+ System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2 PCI
+ A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
+
+2.3 FPGA
+ Altera Cyclone-II EP2C20/35 with PCI DMA engines.
+ Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
+ Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
+
+2.3.1 I/O @ FPGA
+ 2x8 Outputs : Infineon High-Side Switches to Main Supply.
+ 2x8 Inputs : Programmable input threshold + trigger capabilities
+ 2 dedicated flash interfaces for illuminator boards.
+ Cross trigger for chaining several boards.
+
+2.4 I2C
+ Bus1:
+ MAX5381 DAC @ 0x60 for 1st digital input threshold.
+ LM75 @ 0x90 for temperature monitoring.
+ EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+ 1st image sensor interface (slave adresses depend on sensor)
+ Bus2:
+ MAX5381 DAC @ 0x60 for 2nd digital input threshold.
+ 2nd image sensor interface (slave adresses depend on sensor)
+
+3 Flash layout.
+
+ reset vector is 0xFFF00100, i.e. "HIGHBOOT".
+
+ FF800000 environment
+ FF802000 redundant environment
+ FF804000 u-boot script image
+ FF806000 redundant u-boot script image
+ FF808000 device tree blob
+ FF80A000 redundant device tree blob
+ FF80C000 tbd.
+ FF80E000 tbd.
+ FF810000 kernel
+ FFC00000 root FS
+ FFF00000 u-boot
+ FFF80000 FPGA raw bit file
+
+ mtd partitions are propagated to linux kernel via device tree blob.
+
+4 Booting
+
+ On startup the bootscript @ FF804000 is executed. This script can be
+ exchanged easily. Default boot mode is "boot from flash", i.e. system
+ works stand-alone.
+
+ This behaviour depends on some environment variables :
+
+ "netboot" : yes ->try dhcp/bootp and boot from network.A
+ "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for DHCP
+ server configuration, e.g. to provide different images to different
+ devices.
+
+ During netboot the system tries to get 3 image files:
+ 1. Kernel - name + data is given during BOOTP.
+ 2. Initrd - name is stored in "initrd_name"
+ 3. device tree blob - name is stored in "dtb_name"
+ Fallback are ther flash versions.
+
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
