I'm writing the drivers for a MIPS 4KEc based SoC, and was wondering where they should go in the source code tree.
Having done ARM in the past, my first guess would be (calling the SoC
'qux', made by company 'foo', and a 'bar' eval board for now):
cpu/mips/qux
spi.c
nand.c
ether.c
And register header files go in:
include/asm-mips/arch-qux
ddr.h
spi.h
nand.h
ether.h
And the board-specific stuff (like DDR configs, PHY addresses, etc)
would go in:
board/foo/bar
config.mk
ether.c
ddr.c
...
I only ask, because there is no SoC directories under 'cpu/mips', nor
any SoC directories under 'include/asm-mips'
Jason McMullan
MTS SW
System Firmware
NetApp
724.741.5011 Fax
724.741.5166 Direct
412.656.3519 Mobile
[EMAIL PROTECTED]
www.netapp.com
signature.asc
Description: This is a digitally signed message part
------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
