According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
Also fix a typo when verifying a jumper configuration. While at it, make
two needlessly global functions static.
Signed-off-by: Guennadi Liakhovetski <[EMAIL PROTECTED]>
---
diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S
index 099a7ca..e166058 100644
--- a/board/mx31ads/lowlevel_init.S
+++ b/board/mx31ads/lowlevel_init.S
@@ -220,7 +220,7 @@ lowlevel_init:
mov r1, #CS4_BASE
ldrh r1, [r1, #0x2]
/* Is 27MHz switch set? */
- ands r1, r1, #0x16
+ ands r1, r1, #0x10
/* 532-133-66.5 */
ldr r0, =CCM_BASE
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
index 16b2cf1..29c08c1 100644
--- a/cpu/arm1136/mx31/generic.c
+++ b/cpu/arm1136/mx31/generic.c
@@ -39,7 +39,7 @@ static u32 mx31_decode_pll(u32 reg, u32 infreq)
(mfd * pd)) << 10;
}
-u32 mx31_get_mpl_dpdgck_clk(void)
+static u32 mx31_get_mpl_dpdgck_clk(void)
{
u32 infreq;
@@ -51,7 +51,7 @@ u32 mx31_get_mpl_dpdgck_clk(void)
return mx31_decode_pll(__REG(CCM_MPCTL), infreq);
}
-u32 mx31_get_mcu_main_clk(void)
+static u32 mx31_get_mcu_main_clk(void)
{
/* For now we assume mpl_dpdgck_clk == mcu_main_clk
* which should be correct for most boards
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
index f89a401..0552c27 100644
--- a/include/asm-arm/arch-mx31/mx31.h
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -24,9 +24,7 @@
#ifndef __ASM_ARCH_MX31_H
#define __ASM_ARCH_MX31_H
-u32 mx31_get_mpl_dpdgck_clk(void);
-u32 mx31_get_mcu_main_clk(void);
-u32 mx31_get_ipg_clk(void);
-void mx31_gpio_mux(unsigned long mode);
+extern u32 mx31_get_ipg_clk(void);
+extern void mx31_gpio_mux(unsigned long mode);
#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 7614b95..2ea48a6 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -28,7 +28,7 @@
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core
*/
#define CONFIG_MX31 1 /* in a mx31 */
#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32 32000
+#define CONFIG_MX31_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -139,7 +139,7 @@
#define CFG_LOAD_ADDR CONFIG_LOADADDR
-#define CFG_HZ 32000
+#define CFG_HZ CONFIG_MX31_CLK32 /* use 32kHz clock as source
*/
#define CONFIG_CMDLINE_EDITING 1
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
