Hi, Remove gaps and whitespaces in README file
Here in my company i cannot use git and hence no git-patch or git-mail. Will see if i can convince them to allow git. sorry till then Regards Gururaja Signed off by: Gururaja Hebbar <[EMAIL PROTECTED]> diff -purN u-boot-1.3.3/README u-boot-1.3.3-modified/README --- u-boot-1.3.3/README 2008-05-19 03:47:11.000000000 -0700 +++ u-boot-1.3.3-modified/README 2008-05-20 13:58:47.656250000 -0700 @@ -180,15 +180,15 @@ Directory Hierarchy: - dtt Digital Thermometer and Thermostat drivers - examples Example code for standalone applications, etc. - include Header Files -- lib_arm Files generic to ARM architecture -- lib_avr32 Files generic to AVR32 architecture -- lib_generic Files generic to all architectures -- lib_i386 Files generic to i386 architecture -- lib_m68k Files generic to m68k architecture -- lib_mips Files generic to MIPS architecture -- lib_nios Files generic to NIOS architecture +- lib_arm Files generic to ARM architecture +- lib_avr32 Files generic to AVR32 architecture +- lib_generic Files generic to all architectures +- lib_i386 Files generic to i386 architecture +- lib_m68k Files generic to m68k architecture +- lib_mips Files generic to MIPS architecture +- lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture -- lib_sparc Files generic to SPARC architecture +- lib_sparc Files generic to SPARC architecture - libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test @@ -608,7 +608,7 @@ The following options need to be configu CONFIG_CMD_NAND * NAND support CONFIG_CMD_NET bootp, tftpboot, rarpboot CONFIG_CMD_PCI * pciinfo - CONFIG_CMD_PCMCIA * PCMCIA support + CONFIG_CMD_PCMCIA * PCMCIA support CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network host CONFIG_CMD_PORTIO * Port I/O @@ -618,7 +618,7 @@ The following options need to be configu CONFIG_CMD_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information (requires CONFIG_CMD_I2C) - CONFIG_CMD_SETGETDCR Support for DCR Register access + CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support @@ -1697,14 +1697,14 @@ The following options need to be configu Legacy uImage format: - Arg Where When + Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum + -3 common/cmd_bootm.c Image data has bad checksum + 4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) @@ -1716,11 +1716,11 @@ Legacy uImage format: -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 9 common/image.c Start initial ramdisk verification - -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum + -10 common/image.c Ramdisk header has bad magic number + -11 common/image.c Ramdisk header has bad checksum 10 common/image.c Ramdisk header is OK - -12 common/image.c Ramdisk data has bad checksum - 11 common/image.c Ramdisk data has correct checksum + -12 common/image.c Ramdisk data has bad checksum + 11 common/image.c Ramdisk data has correct checksum 12 common/image.c Ramdisk verification complete, start loading -13 common/image.c Wrong Image Type (not PPC Linux Ramdisk) 13 common/image.c Start multifile image verification @@ -1762,7 +1762,7 @@ Legacy uImage format: 48 common/cmd_ide.c reading Image Header from IDE device OK -49 common/cmd_ide.c Image header has bad magic number 49 common/cmd_ide.c Image header has correct magic number - -50 common/cmd_ide.c Image header has bad checksum + -50 common/cmd_ide.c Image header has bad checksum 50 common/cmd_ide.c Image header has correct checksum -51 common/cmd_ide.c Error reading Image from IDE device 51 common/cmd_ide.c reading Image from IDE device OK http://www.nabble.com/file/p17336468/uboot-1.3.3-README_remove_whitespace.diff uboot-1.3.3-README_remove_whitespace.diff -- View this message in context: http://www.nabble.com/-PATCH--Remove-gaps-and-whitespaces-in-README-file-tp17336468p17336468.html Sent from the Uboot - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users