This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
introduced by the commit:
ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
With this patch SDRAM will get initialized again and booting from NAND
is working again.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
nand_spl/board/amcc/bamboo/sdram.c | 10 ++--------
1 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/nand_spl/board/amcc/bamboo/sdram.c
b/nand_spl/board/amcc/bamboo/sdram.c
index ac77d06..ca25252 100644
--- a/nand_spl/board/amcc/bamboo/sdram.c
+++ b/nand_spl/board/amcc/bamboo/sdram.c
@@ -36,7 +36,7 @@ static void wait_init_complete(void)
}
/*
- * early_sdram_init()
+ * long int initdram(int board_type)
*
* As the name already indicates, this function is called very early
* from start.S and configures the SDRAM with fixed values. This is needed,
@@ -51,7 +51,7 @@ static void wait_init_complete(void)
* modules are still plugged in. So it is recommended to remove the DIMM
* modules while using the NAND booting code with the fixed SDRAM setup!
*/
-void early_sdram_init(void)
+long int initdram(int board_type)
{
/*
* Soft-reset SDRAM controller.
@@ -87,12 +87,6 @@ void early_sdram_init(void)
*/
mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/
wait_init_complete();
-}
-long int initdram(int board_type)
-{
- /*
- * Nothing to do here, just return size of fixed SDRAM setup
- */
return CFG_MBYTES_SDRAM << 20;
}
--
1.5.5.3
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
