In message <[EMAIL PROTECTED]> you wrote: > On AD7414 the first value upon bootup is not read correctly. > This is most likely because of the 800ms update time of the > temp register in normal update mode. To get current values > each time we issue the "dtt" command including upon powerup > we switch into one-short mode. > > This patch fixes the problem on AD7414 equipped boards (Sequoia, > Canyonlands etc), that temp value printed in the bootup log was > incorrect. > > Signed-off-by: Stefan Roese <[EMAIL PROTECTED]> > --- > drivers/hwmon/lm75.c | 13 +++++++++++++ > 1 files changed, 13 insertions(+), 0 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Real computer scientists don't comment their code. The identifiers are so long they can't afford the disk space. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
