Signed-off-by: Ben Warren <[EMAIL PROTECTED]>
---
board/freescale/mpc8349emds/mpc8349emds.c | 2 +-
drivers/spi/Makefile | 2 +-
drivers/spi/mpc8xxx_spi.c | 2 --
include/configs/MPC8349EMDS.h | 1 -
include/spi.h | 9 +++++++++
lib_ppc/board.c | 2 --
6 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c
b/board/freescale/mpc8349emds/mpc8349emds.c
index e18e68e..0acc17e 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -253,7 +253,7 @@ void sdram_init(void)
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
-#ifdef CONFIG_HARD_SPI
+#ifdef CONFIG_MPC8XXX_SPI
#define SPI_CS_MASK 0x80000000
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e66e0ee..4f7b679 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libspi.a
-COBJS-y += mpc8xxx_spi.o
+COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 136fb50..9eaf986 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -22,7 +22,6 @@
*/
#include <common.h>
-#if defined(CONFIG_MPC8XXX_SPI) && defined(CONFIG_HARD_SPI)
#include <malloc.h>
#include <spi.h>
@@ -180,4 +179,3 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout,
return 0;
}
-#endif /* CONFIG_HARD_SPI */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index bd77540..af72538 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -355,7 +355,6 @@
/* SPI */
#define CONFIG_MPC8XXX_SPI
-#define CONFIG_HARD_SPI /* SPI with hardware support */
#undef CONFIG_SOFT_SPI /* SPI bit-banged */
/* GPIOs. Used as SPI chip selects */
diff --git a/include/spi.h b/include/spi.h
index 7744c2e..320e50e 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -24,6 +24,15 @@
#ifndef _SPI_H_
#define _SPI_H_
+/* Controller-specific definitions: */
+
+/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
+#ifdef CONFIG_MPC8XXX_SPI
+# ifndef CONFIG_HARD_SPI
+# define CONFIG_HARD_SPI
+# endif
+#endif
+
/* SPI mode flags */
#define SPI_CPHA 0x01 /* clock phase */
#define SPI_CPOL 0x02 /* clock polarity */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index a908831..afa0c74 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -90,9 +90,7 @@ void doc_init (void);
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
-#if defined(CONFIG_HARD_SPI)
#include <spi.h>
-#endif
#include <nand.h>
static char *failed = "*** failed ***\n";
--
1.5.4.3
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
