In message <[EMAIL PROTECTED]> you wrote: > This commit adds MTD support for the M25P80 (1Mx8) and the M25P40 (512kx8) > SPI Flash components from ST Microelectronics. ... > --- /dev/null > +++ b/drivers/mtd/spi/stmicro.c > @@ -0,0 +1,326 @@ > +/* > + * $Id$ > + *
Please remove these two lines. > + do { > + ret = spi_xfer(spi, 8, NULL, &status, 0); > + if (ret) > + return -1; > + > + if ((status & STMICRO_SR_WIP) == 0) > + break; > + > + } while (1 || get_timer(timebase) < timeout); Hm... the timeout code seems to be disabled here? I think you should remove either the first or the second expression. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Mistakes are often the stepping stones to utter failure. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users