Hi On Thu, May 29, 2008 at 9:58 PM, Kenneth Johansson <[EMAIL PROTECTED]> wrote: >> I noticed that not a lot of platforms/boards set GD_FLG_RELOC so >> command history will probably cease to work for these boards also? > > Most boards do the relocation and then it gets set by the common > board_init_r() function.
I got hit by this problem today and only after I figured out what was really wrong I searched the mailing list archives and found this thread (and a couple of others). I'm using an ARM board and as far as I can see lib_arm/board.c does not set the GD_FLG_RELOC bit, in fact no ARM boards do so in the current git tree (according to grep anyway). Many other architectures set the flag in their respective common lib_<arch>/board.c. Should/can the GD_FLG_RELOC be set in a common place (lib_arm/board.c:start_armboot) for ARM as well? Or shall we place gd->flags |= GD_FLG_RELOC in the board specific init routines/files? Regards, Magnus Lilja ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
