I forget to put some infos !
Hi all,
I'm trying to port uboot and linux on a Avnet fx12 mm. Thanks to Llandre for
his mmfx12
patch. And i also used the ll_temac driver. So uboot is running with
network.
I built linux using the xilinx kernel
(git://git.xilinx.com/linux-2.6-xlnx.git). I can start it using XMD but not
with uboot.
So my question, Did someone already the same job ? I'm a newbie, so every tip
is welcome
The main aim of the system is to achieve a fast Ethernet connection > 15 MB/s
Architecture on the virtex 4 FX and mapping
ppc405
DDR_SDRAM 0x00000000 0x03ffffff
FLASH_2Mx16 0xffc00000 0xffffffff
xps_intc_0 interrupt controller
TriMode_MAC_GMII
RS232 using xps_uart16550
PLB Bus
I have built u-boot 1.3.3.rc3
Linux kernel is 2.6.25-xlnx
Thanks
Simon Frey
_____________________________________________________________________________
Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
