Hi,
On Tue, Jun 10, 2008 at 01:11:38PM -0500, Menon, Nishanth wrote:
> Commit ee6d36a5405305f3bbdb0457948c219731b3d9cc introduced requirement for
> default functions be registered. Without this accessing /dev/ram0 will not
> work on SDP3430 in the default config.
In your patch tabs are replaced by whitespaces, so it does not apply.
Fixed and applied, but I won't do this for a longer patch ;)
Regards,
Sascha
>
> Signed-off-by: Nishanth Menon<[EMAIL PROTECTED]>
>
> ---
> board/omap/board-sdp343x.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> Index: u-boot-v2.git/board/omap/board-sdp343x.c
> ===================================================================
> --- u-boot-v2.git.orig/board/omap/board-sdp343x.c 2008-06-10
> 13:03:29.000000000 -0500
> +++ u-boot-v2.git/board/omap/board-sdp343x.c 2008-06-10 13:03:56.000000000
> -0500
> @@ -656,8 +656,11 @@
> static struct driver_d ram_drv = {
> .name = "ram",
> .probe = dummy_probe,
> + .open = dev_open_default,
> + .close = dev_close_default,
> .read = mem_read,
> .write = mem_write,
> + .lseek = dev_lseek_default,
> .type = DEVICE_TYPE_DRAM,
> };
> #endif
>
--
Pengutronix e.K. - Linux Solutions for Science and Industry
-----------------------------------------------------------
Kontakt-Informationen finden Sie im Header dieser Mail oder
auf der Webseite -> http://www.pengutronix.de/impressum/ <-
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
