Hi, 2008/6/16 harshadnimje <[EMAIL PROTECTED]>: > > For which peripherals I need to write the driver as far as U-boot is > concerned?
1.Real time clock Not Supported 2.Timer Unit Supported 3.Bus state controller Supported 4.DMA cotroller Not Supported 5.Serial communication interface Not Suported 6.I/O Ports Supported 7.Interrupt controller Not Supported 8.PCI conroller. Supported. But check on SH7751R only. > In generic U-Boot1.3.2 directory structure where do I need to make the > change? > At what places the config files and make files will have undergo > changes? > You need create your board configration file and Bus state controller initialization file(lowleve_init.S). You can take a source code of r2d board into account. This board has SH7751R cpu too. board/r2dplus/* Best reagards, Nobuhiro ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
