Hi Sascha, This series of patches introduce I2C support in U-Boot v2. This support is similar to the one in 2.6.26 rc5 kernel. i2ctools diagnostics introduced is based on http://www.lm-sensors.org/wiki/I2CTools
The benefit is that we can backport drivers present in linux kernel to u-boot v2 with very little effort. In the case of OMAP, just the i2c-core and adapter driver comprises of around 6k size addition. Tools add up further. The complete patch series is available here: http://linux.omap.com/pub/patches/rfc/u-boot-v2/i2c-20080617/ This series contains the following patches: [Patch 1/9] U-boot-V2:ID: Sync mod_devicetable [Patch 2/9] U-boot-V2:ARM: Introduce additional bitops [Patch 3/9] U-boot-V2:ID: Introduce idr [Patch 4/9] U-boot-V2:I2C: Introduce core [Patch 5/9] U-boot-V2:I2C:Algos: Introduce I2c Algos [Patch 6/9] U-boot-V2:Commands: Introduce i2c commands [Patch 7/9] U-boot-V2:ARM:OMAP: Introduce OMAP classes [Patch 8/9] U-boot-V2:I2C:Busses: Add I2c OMAP Adapter [Patch 9/9] U-boot-V2:Boards:SDP3430 enable i2c bus1 Regards, Nishanth Menon ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
