Hello Tsi-Chung,
> The received status and len was in little endian
> format and caused the ethernet unable to proceed
> further. Add __le16_to_cpu() in dm9000_rx_status_16bit().
I can imagine that similar problems are also valid for the 32bit code
(and maybe the 8 bit code too)
It is probably better to change those other 2 routines too, to keep
them all behave the same.
Do you provide a patch for those routines too? (if required)
Kind Regards,
Remy
>
> Signed-off-by: TsiChung Liew <[EMAIL PROTECTED]>
> ---
> drivers/net/dm9000x.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
> index 844fb76..2895344 100644
> --- a/drivers/net/dm9000x.c
> +++ b/drivers/net/dm9000x.c
> @@ -222,8 +222,8 @@ static void dm9000_rx_status_16bit(u16 *RxStatus, u16
> *RxLen)
> {
> DM9000_outb(DM9000_MRCMD, DM9000_IO);
>
> - *RxStatus = DM9000_inw(DM9000_DATA);
> - *RxLen = DM9000_inw(DM9000_DATA);
> + *RxStatus = __le16_to_cpu(DM9000_inw(DM9000_DATA));
> + *RxLen = __le16_to_cpu(DM9000_inw(DM9000_DATA));
> }
>
> static void dm9000_rx_status_8bit(u16 *RxStatus, u16 *RxLen)
> --
> 1.5.4.1
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
