Hi all, Can anyone point me in the right direction to figure out why after porting up to 1.3.3 from 1.1.5 I'm getting a "No ethernet found." error.
I'm using a cirrus logic EP9302 Arm processor that was someone initially ported to u-boot 1.1.5. So I'm not to familiar with how the CPU specific files should be laid out. Did the config commands change to set up Ethernet? The Ethernet driver for the chip is under cpu/arm920t/ep93xx/eth.c Any suggestions would be appreciated. Thanks -- Stuart Wood Lab X Technologies, LLC 176 Anderson Ave. Suite 302 Rochester, NY 14607 Phone: (585) 271-7790 x207 Fax: (585) 473.4707 ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
