Wolfgang Denk schrieb: > In message <[EMAIL PROTECTED]> you wrote: >> You are right. 100 ms is too high, although it should be irrelevant for >> a U-Boot command. Measurement showed, that some 100 microseconds would >> be enough. Do you agree if I set the timeout value to 1 ms? Other proposals? > > Never say 100 ms is irrelevant for U-Boot. It's 100 ms of total boot > time that you burn for nothing.
If it was relevant for booting, you would be right. But this routine isn't executed at boot time. It's called by the iprobe command invoked by the user on the command line. As I proposed, 1 ms should be sufficient. Kind regards, Jens ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
