Hi Nobuhiro,
On Tuesday 08 July 2008, Nobuhiro Iwamatsu wrote:
> > c) CONFIG_PCI_CONFIG_HOST_BRIDGE is defined and the env variable
> > "pciconfighost" is defined too
> >
> > If I understand you correctly, then you have some PCI devices at BDF ==
> > 0,0,0 that need to be configured (and not skipped). Correct? If this is
> > correct, wouldn't it be enough for you to use "solution" c) from above?
>
> Yes, Your indication is right. And there was the part which I did not
> understand.
> But, I think that there is still a problem only by these measures.
>
> For example, BDF == 0,0,0 are not displayed when I validated
> CONFIG_PCI_SCAN_SHOW.
Right, this is a problem.
> 475 #ifdef CONFIG_PCI_SCAN_SHOW
> 476 /* Skip our host bridge */
> 477 if ( dev != PCI_BDF(hose->first_busno,0,0) ) {
> 478 unsigned char int_line;
> 479
> 480 pci_hose_read_config_byte(hose, dev,
> PCI_INTERRUPT_LINE, 481 &int_line);
> 482 printf(" %02x %02x %04x %04x %04x %02x\n",
> 483 PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,
> 484 int_line);
> 485 }
> 486 #endif
>
> I think that it is a problem to handle only "BDF == 0,0,0".
> I think that I had better check it in Class ID.
> （Of cource, I understand that my implementation is mean.）
Yes, switching to this class-ID check would be probably "cleaner". The main
problem I see with this is, that we could break backward compatibility. I
really don't know if all boards currently using this "Host-Bridge-Skipping"
implementation have the class-ID set to 0x0680 (Other bridge type).
So I suggest the following solution: I'll prepare a patch to move
this "Skip-device-check" into a separate weak function with the current
behavior. You (and others) can then define a custom "Skip-device-check"
function in your platform code that overrides this default function.
I'll send this patch to the list in a short while. Please try it out and let
me know if this works for you.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED]
=====================================================================
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
