Paul Gortmaker wrote: > The existing config doesn't define CONFIG_HAS_ETH0, and so the > fdt support doesn't update the zeros in the dtb local-mac with > real data from the u-boot env. Since the existing config is > tailored to just two interfaces, get rid of the ETH2 definitions > at the same time. > --- > include/configs/sbc8560.h | 3 +-- > 1 files changed, 1 insertions(+), 2 deletions(-) > > diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h > index f07fbc0..e5195e0 100644 > --- a/include/configs/sbc8560.h > +++ b/include/configs/sbc8560.h > @@ -407,11 +407,10 @@ > > /*Note: change below for your network setting!!! */ > #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) > +# define CONFIG_HAS_ETH0 > # define CONFIG_ETHADDR 00:01:af:07:9b:8a > # define CONFIG_HAS_ETH1 > # define CONFIG_ETH1ADDR 00:01:af:07:9b:8b > -# define CONFIG_HAS_ETH2 > -# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c > #endif > > #define CONFIG_SERVERIP 192.168.0.131 > Please get rid of all default network parameters while you're at it (MAC addresses, IP addresses etc.)
regards, Ben ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
