Dear Wolfgang Denk,

> If you had to make changes, this means that you are not running on the
very same hardware as trhe board configuration was made for.

[Amit]: If you look at my so called "changes" they don't make any difference. 
For example #defining one FLAG does not mean that there is change. README 
clearly mentions that if one wants particular piece of code to be enabled then 
#define it. Secondly, there is increase in number of sectors.
I think you have not looked at what I meant by "changes".

> Obviously you failed to port U-Boot correctly to your hardware. This
can be anything.

[Amit]: In my case there is no need of porting because as per my above 
explanation there is no change in the code and I am able to run commands from 
hyper terminal like "saveenv", setenv, erase, fli, bdi ... etc

> We cannot ignore it. It is legal advice from your company, isn't it?

[Amit]: As per the disclaimer "If you are not the intended recipient and you 
copy, disclose, or distribute this e-mail or its contents to any other person" 
then such actions are unlawful. In this case, intended recipient is 
u-boot-users@lists.sourceforge.net ... so I think there should not be any 
problem.

> This means that your posting of this message to a public maling list was 
> unlawful. Please do not do this again. Such incidents may be
reported to your management.

[Amit]: By my above explanation, I don't think I have done anything wrong. If 
you still think I have done something wrong or I have missed something, kindly 
explain me.

Regards,
Amit Kumar
Project Manager
Infosys, India

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 09, 2008 5:43 PM
To: Amit Kumar
Cc: u-boot-users@lists.sourceforge.net
Subject: Re: [U-Boot-Users] Tftp command !!

Dear Amit,

in message <[EMAIL PROTECTED]> you wrote:
>
> In this code, I have made only two changes:

If you had to make changes, this means that you are not running on the
very same hardware as trhe board configuration was made for.

This WILL NOT work.

If you have custom hardware, you will have to port U-Boot to that
hardware.

> Any idea why file transfer is not happening. I have already followed step 4.6 
> of DULG-tqm8xxl.pdf

Obviously you failed to port U-Boot correctly to your hardware. This
can be anything.

> Amit
> P.S: Please ignore the disclaimer as I cannot remove it.

We cannot ignore it. It is legal advice from your company, isn't it?

> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are 
> not
> to copy, disclose, or distribute this e-mail or its contents to any other 
> person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has 
> taken

This means that your posting of this message to a public maling list
was unlawful. Please do not do this again. Such incidents may be
reported to your management.

> --_000_3F8E087F6663404B945D1FCF703777D115C5C7DD93BLRKECMBX06ad_
> Content-Type: text/html;
>       charset="utf-8"
> Content-Transfer-Encoding: quoted-printable

And do not post HTML here.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
I express preference for a chronological  sequence  of  events  which
precludes a violence.   - Terry Pratchett, _The Dark Side of the Sun_

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to