HI all,
I am working on customized arm9 versatile board.
I am trying to write a driver for arm amba pl031 rtc module. i need to
setup rtc controller to enable it.
I need to call it during boot sequence. But in lib_arm/board.c we do not
have a call to rtc_init func.
i checked blackfin boot up sequence and they have something like below
in uboot-1.3.3/lib_blackfin/board.c @ line 315
checkboard();
#if defined(CONFIG_RTC_BFIN) && defined(CONFIG_CMD_DATE)
rtc_init();
#endif
timer_init();
Shouldnt it be implemented for arm boot up sequence also.
Can i implement the same and send the patch to uboot. something like
below in uboot-1.3.3/lib_arm/board.c @ line 267
#if defined(CONFIG_DISPLAY_BOARDINFO)
checkboard, /* display board info */
#endif
#if defined(CONFIG_RTC_PL031) && defined(CONFIG_CMD_DATE)
rtc_init();
#endif
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
init_func_i2c,
#endif
Thanks in advance
Regards
Gururaja
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
