Hello everybody,
I just started to work on OMAP 3430 it with porting of LINUX 2.6 on a new
board.
thats how i proceed..
I have dowonload the following for OMAP3430 from this source
(
http://focus.ti.com/general/docs/wtbu/wtbusplashcontent.tsp?templateId=6123&contentId=4750
)
2.6_kernel-v1.tar.gz
u-boot-v1.0b.tar.gz
x-load-v1.tar.gz
and compiled using ARM TOOL chain to generate
x-load.bin
u-boot.bin
vmlinux
Now i have to flash these images into the target.
1.Can any one tell me the exact address location of flash where i should
flash it.
Thanks a lot
Kapil Kumar
______________________________________________________________________
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users