You are right. After taking a closer look, the binaries generated are u-boot.bin, u-boot.srec and u-boot ,not sure why the u-boot.bin.gz is in there tho.
Anyway, it looks like I have the correct binary files. Which one do I burn to flash? And how do I go about putting it on the board? (new to uboot) Thanks. -----Original Message----- From: Jean-Christophe PLAGNIOL-VILLARD [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2008 3:12 PM To: Rugunda, Solo Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] Trouble with Make Command On 14:49 Tue 22 Jul , Rugunda, Solo wrote: > Thanks Jerry and Nathan > > So I built the image by running the Make with the correct cross compiler > from the uboot prompt. > > The file produced is u-boot.bin.gz u-boot.bin.gz? are you sure? It's suppose to produce a elf u-boot and u-boot.bin. You are suppose to burn the u-boot.bin to your flash Best Regards, J. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users