In message <[EMAIL PROTECTED]> you wrote: > > I have verified that the Sequoia (440EPx) does not have its UARTs > properly configured. The attached patch corrects this by setting three > bits in SDR0_PFC1 to enable 4-wire mode, and to select cts/rts > functionality for the UARTs. Also, I modified the GPIO settings for
We definitely do NOT want any hardware handshake on the serial console. Never. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] I'm frequently appalled by the low regard you Earthmen have for life. -- Spock, "The Galileo Seven", stardate 2822.3 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users