In message <[EMAIL PROTECTED]> you wrote: > > > Your choices are 0xfff00000 and zero, based on the BMS (Boot Memory > > Space) bit of the low reset control word. > > > > -Scott > > ...and of the two options, I recommend 0xfff00000 ("boot high"). Note > that the start of u-boot is 0xfff00000 but the reset vector itself is > 0xfff00100 (or 0x00000100 for "boot low"). The first 0x100 bytes has > the u-boot signature and version info.
I disagree. High-booting systems are a PITA. You always lose a full megabyte at the end of the flash of which usually only 256 kB or less are needed for U-Boot, wasting 0.75 MB. Also, systems with varying number of flash banks and/or flash sizes are not really straightforward to handle. Low-booting is much, much saner. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] A Stanford research group advertised for participants in a study of obsessive-compulsive disorder. They were looking for therapy clients who had been diagnosed with this disorder. The response was grati- fying; they got 3,000 responses about three days after the ad came out. All from the same person. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users