Hi, I initialized the watchdog on a S3C6400 processor. The U-Boot boots fine until the command line prompt.
If I don't use the hush parser, watchdog resets the board approx. after 15 seconds, no matter if I do nothing or if I type in commands. Reading the watchdog counter with "md" shows that it continuously counts down. If I use the hush parser the watchdog is only triggered if I run commands, e.g. reading the watchdog counter. I can watch, that it gets updated. If I do nothing, the board is resetted approx. after 15 seconds. Is it intended, that the watchdog isn't triggered in U-Boot's interactive mode? I can't believe that. Or did I missed something? On which position could I insert in a "WATCHDOG_RESET();" call? The main_loop and the hush parser are very hard to understand. Thanks in advance for help. U-Boot is 1.3.4. Kind regards, Jens P.S.: I hope my e-mail is readable. I currently have to use M$ Outlo*k unitl the mail system on our Linux machine does work again. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
