Hi, I was running U-boot-v2 on imx27ads board and it's hanging up on the terminal after the following display.
-------- U-Boot 2.0.0-rc5-git (Sep 22 2008 - 23:05:39) Board: Freescale i.MX27 ADS --------- Also I am using Intel P30 strata flash. When the MTD cfi driver is enabled in the menuconfig U-boot gives the following message and hangs up. ------------ U-Boot 2.0.0-rc5-git (Sep 22 2008 - 23:05:39) Board: Freescale i.MX27 ADS cfi_probe: cfi_flash base: 0xc0000000 size: 0x02000000 ------------ Please provide your suggestions. Thanks, Lejin -----Original Message----- From: Robert Schwebel [mailto:[EMAIL PROTECTED] Sent: Friday, August 22, 2008 12:17 AM To: Lejin K Joy Cc: 'Sascha Hauer'; u-boot@lists.denx.de Subject: Re: [U-Boot] u-boot for imx27 Board Hi, On Thu, Aug 21, 2008 at 09:43:53PM +0530, Lejin K Joy wrote: > Could you kindly suggest me the arm cross compiler's link /name using > which you have compiled the u-boot. I am using > obsolete-gcc-3.3.2.tar.bz2 compiler. We usually build the MX27 stuff with a generic arm-v4 cross toolchain, built with OSELAS.Toolchain-1.1.1. You can compile such a toolchain yourself easily with ptxdist, look here for the details: http://www.pengutronix.de/oselas/toolchain/index_en.html rsc -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hannoversche Str. 2, 31134 Hildesheim, Germany Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot