Hi, 

I tried to boot with ext2 file system and get this result:
=> usb start
(Re)start USB...
USB:   scanning bus for devices... cannot reset port 1!?
2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
=>ext2load usb 0:1 0x00200000 uImage
…….
1045127 bytes read
=> bootm 0x8c200000
*  kernel: cmdline image address = 0x8c200000
## Booting kernel from Legacy Image at 8c200000 ...
   Image Name:   Linux-2.6.22.11
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    974852 Bytes = 952 kB
   Load Address: 8c002000
   Entry Point:  8c002000
   Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!

Could you tell me an advice?

NOTE: I think I can have a problem with “Load Address: 8c002000”  ?
 
Best regard.

-- 
View this message in context: 
http://www.nabble.com/-UBoot--Hows-to-boot-Linux-Kernel-from-USB-tp19740267p19777398.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to