hi every one..
currently, u-boot load it self in SDRAM address : 0x80100000
i want the u-boot to be loaded to address: 0x80FE0000.
i have try the following:
1#repeating the last steps preform by the build script:
1-./tools/mkimage -A mips -T firmware -C bzip2 -a 0x80100000 -e 0x80100000
-n 'u-boot image' -d u-boot.bz2 u-boot.zimg
2-./mk_ubootimg.sh head.bin u-boot.zimg 12400 u-boot.img
3-mipsel-linux-objcopy -I binary -O binary --pad-to 0x10000 u-boot.img
u-boot.img
that of course after changing to the new address, but when downloading it to
the board, it hangs
2#in the mkimage.c file, i have change the code a little:
case 'a':
if (--argc <= 0)
usage ();
addr = strtoul ("0x80FE0000", (char **)&ptr,
16);
*++argv;
if (*ptr) {
fprintf (stderr,
"%s: invalid load address %s\n",
cmdname, *argv);
exit (EXIT_FAILURE);
their was no compilation error, but also the board hangs
3# i thought a bout the entry point, and make it to match the load address,
but still the same result.
can you tell me how to change the load address without crippling the u-boot?
with respect
sahar mustafa.
--
View this message in context:
http://www.nabble.com/how-can-i-change-u-boot-load-address--tp19836732p19836732.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
