On Tue, Oct 7, 2008 at 5:05 PM, Wolfgang Denk <[EMAIL PROTECTED]> wrote:
> Dear "Mathieu Dube", > > please keep the ML on Cc: ! > sorry about that. > > > > if I nm(with the correct toolchain) the executable > > > > it gives me 0c100000 T hello_world > > > > so I go 0x8c100000 > > > > still crashes. > > HM. I'm not really surprised. For me, 0x8c100000 is not the same as > 0x0c100000. For me, that makes a difference of 2 GB. > quite right. I did : tftp 0x80000000 /tftpboot/hello_world.bin since the entry point is 0x0c100000 shouldnt I go from 0x80000000 + 0x0c100000? which is 0x8c100000 ? am I wrong in using 0x80000000 which is the start address of the SDRAM according to the board's documentation? 0x00000000 to 0x1fffc000 is unused and if I tftp 0x00000000 it doesnt work. > > is there another way to find the exact entry point? > > "nm" is a good way. > thanks. I used that. -M -- Mathieu Dube Software Engineer MobileFusion, Inc 2715 Sarah St Pittsburgh PA, 15203 Main: 412.481.1111 Ext:140 Fax: 412.481.0220 Email: [EMAIL PROTECTED] URL: www.mobilefusioninc.com **************************************************************************** This communication (including any attachments) is for the use of the intended recipient(s) only and may contain information that is confidential, privileged or otherwise legally protected. Any unauthorized use or dissemination of this communication is prohibited. If you have received this communication in error, please immediately notify the sender by return e-mail message and delete all copies of the original communication. Thank you for your cooperation.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot