Hello Stelian, >> This clock is required, but is usually _not_ configured by U-boot (for >> the AT91SAM series) but by the bootstrap code. You could check if the >> current settings for PLLB matches the settings done by Linux.
> Bingo ! The bootstrap code does appear to setup some wrong values for > the PLLB multiplier/divisor. Once I set up the PLLB to use the same > values as Linux, USB starts to work ! Yay ! This is very good news, but it proves again that USB never worked before on these cores... Maybe more pieces are missing to get it completely working... > Still, only one of my three USB sticks works, the other two exhibit some > error, so maybe there is something additional to be done: I see that a 'stall' state is returned by the device. U-boot handles the stall state always as an error, and there is no recovery from that. Maybe, Markus has an idea to solve this? Kind Regards, Remy > > The working USB stick says: > > usb start > (Re)start USB... > USB: scanning bus for devices... New Device 0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > set address 1 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x9 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x19 > get_conf_no 0 Result 25, wLength 25 > if 0, ep 0 > ##EP epmaxpacketin[1] = 2 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=0, Product=1, SerialNumber=0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 1 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 > length 0xFF > Manufacturer > Product OHCI Root Hub > SerialNumber > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x4 > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x9 > usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length > 0x4 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > New Device 1 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > set address 2 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x9 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x27 > get_conf_no 0 Result 39, wLength 39 > if 0, ep 0 > if 0, ep 1 > if 0, ep 2 > ##EP epmaxpacketout[1] = 64 > ##EP epmaxpacketin[2] = 64 > ##EP epmaxpacketin[3] = 64 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=1, Product=2, SerialNumber=3 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 2 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x303 index 0x409 > length 0xFF > Manufacturer P Technology > Product USB Mass Storage Device > SerialNumber 0000000000058D > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length > 0x4 > 2 USB Device(s) found > scanning bus for storage devices... usb_control_msg: request: 0xFF, > requesttype: 0x21, value 0x0 index 0x0 length 0x0 > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x82 length > 0x0 > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x1 length > 0x0 > 1 Storage Device(s) found > U-Boot> usb storage > Device 0: Vendor: UT163 Rev: 0.00 Prod: USB Flash Disk > Type: Removable Hard Disk > Capacity: 963.9 MB = 0.9 GB (1974271 x 512) > U-Boot> > > And the failing one says: > > usb start > (Re)start USB... > USB: scanning bus for devices... New Device 0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > set address 1 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x9 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x19 > get_conf_no 0 Result 25, wLength 25 > if 0, ep 0 > ##EP epmaxpacketin[1] = 2 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=0, Product=1, SerialNumber=0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 1 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 > length 0xFF > Manufacturer > Product OHCI Root Hub > SerialNumber > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x4 > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x9 > usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length > 0x4 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > New Device 1 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > set address 2 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x9 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x27 > get_conf_no 0 Result 39, wLength 39 > if 0, ep 0 > if 0, ep 1 > if 0, ep 2 > ##EP epmaxpacketin[1] = 64 > ##EP epmaxpacketout[2] = 64 > ##EP epmaxpacketin[3] = 2 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=16, Product=32, SerialNumber=48 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 2 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x310 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x320 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x330 index 0x409 > length 0xFF > Manufacturer TTI-WDE > Product USB 2.0 Mobile Disk > SerialNumber FF04112100886 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length > 0x4 > 2 USB Device(s) found > scanning bus for storage devices... usb_control_msg: request: 0xFF, > requesttype: 0x21, value 0x0 index 0x0 length 0x0 > ERROR: USB-error: STALL: TD was moved to the Done Queue because the endpoint > returned a STALL PID (4) > ERROR: USB-error: STALL: TD was moved to the Done Queue because the endpoint > returned a STALL PID (4) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x81 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x2 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > usb_control_msg: request: 0xFF, requesttype: 0x21, value 0x0 index 0x0 length > 0x0 > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did > not provide a handshake (OUT) (5) > > -- > Stelian Pop <[EMAIL PROTECTED]> > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot