On 00:27 Mon 13 Oct , Wolfgang Denk wrote: > Dear Jean-Christophe, > > In message <[EMAIL PROTECTED]> you wrote: > > On 10:36 Fri 29 Aug , Magnus Lilja wrote: > > > Add support for the Freescale i.MX31 PDK (a.k.a 3DS) board. Ethernet and > > > MC13873 RTC support is enabled by this patch. > > > > > > Booting from NAND is not supported yet so U-boot relies on some other > > > initial boot loader to set up SDRAM and clocks and copying U-boot to > > > SDRAM. > > > > > > Signed-off-by: Magnus Lilja <[EMAIL PROTECTED]> > > > --- > > > MAKEALL | 1 + > > > Makefile | 3 + > > > board/freescale/mx31pdk/Makefile | 53 ++++++++++ > > > board/freescale/mx31pdk/config.mk | 1 + > > > board/freescale/mx31pdk/lowlevel_init.S | 30 ++++++ > > > board/freescale/mx31pdk/mx31pdk.c | 76 +++++++++++++++ > > > board/freescale/mx31pdk/u-boot.lds | 59 ++++++++++++ > > > include/configs/mx31pdk.h | 159 > > > +++++++++++++++++++++++++++++++ > > > 8 files changed, 382 insertions(+), 0 deletions(-) > > > > > applied to u-boot-arm branch testing > > This patch (and all the others of this patch series) was sumbitted > while the merge window was open. > > Is there any special reason it was not added to the master branch > yet?
> As we discuss on IRC this board will be merge when it can boot from a storage Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
