On Thu, Oct 9, 2008 at 10:40 PM, Jason Jin <[EMAIL PROTECTED]> wrote: > From: Liu Yu <[EMAIL PROTECTED]> > > The pixis sgmii command depend on the FPGA support on the board, some 85xx > boards support SGMII riser card but did not support this command, define > CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command. > > Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits > are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and > PIXIS_VCFGEN1_MASK in header file for both boards. > > Signed-off-by: Liu Yu <[EMAIL PROTECTED]>
Applied to 85xx-next _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot