Dear Kumar, In message <[EMAIL PROTECTED]> you wrote: > Signed-off-by: Kumar Gala <[EMAIL PROTECTED]> > --- > board/stxssa/Makefile | 9 ++++-- > board/stxssa/ddr.c | 70 > ++++++++++++++++++++++++++++++++++++++++++++++ > board/stxssa/stxssa.c | 6 +++- > board/stxssa/u-boot.lds | 1 - > include/configs/stxssa.h | 30 +++++++++++-------- > 5 files changed, 98 insertions(+), 18 deletions(-) > create mode 100644 board/stxssa/ddr.c
How much of flexibility can be expected from the new DDR code? When you submitted this patch, I verified that it works in the standard configuration (with a 256 MB RAM module). Should it also work with other configurations, say, with a 512 MB or a 1 GB module? If I try it out, booting hangs here: U-Boot 2008.10-rc3-00009-gf7a35a6 (Oct 18 2008 - 18:21:52) CPU: 8541E, Version: 1.1, (0x807a0011) Core: E500, Version: 2.0, (0x80200020) Clock Configuration: CPU: 660 MHz, CCB: 264 MHz, DDR: 132 MHz (264 MT/s data rate), LBC: 66 MHz CPM: 264 Mhz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: Silicon Tx GPPP SSA Board I2C: ready DRAM: 512 MB or: U-Boot 2008.10-rc3-00009-gf7a35a6 (Oct 18 2008 - 18:21:52) CPU: 8541E, Version: 1.1, (0x807a0011) Core: E500, Version: 2.0, (0x80200020) Clock Configuration: CPU: 660 MHz, CCB: 264 MHz, DDR: 132 MHz (264 MT/s data rate), LBC: 66 MHz CPM: 264 Mhz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: Silicon Tx GPPP SSA Board I2C: ready DRAM: 1 GB I.e., the size gets detected correctly, but then it hangs. I know that the old code did not support other memory configurations; should these work now with the new DDR code? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Everyone who comes in here wants three things: 1. They want it quick. 2. They want it good. 3. They want it cheap. I tell 'em to pick two and call me back. - sign on the back wall of a small printing company in Delaware _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot