Dear Stefan Roese, In message <[EMAIL PROTECTED]> you wrote: > The following changes since commit f61f1e150c84f5b9347fca79a4bc5f2286c545d2: > Stefan Roese (1): > Merge branch 'master' of /home/stefan/git/u-boot/u-boot > > are available in the git repository at: > > git://www.denx.de/git/u-boot-ppc4xx.git master > > Adam Graham (3): > ppc4xx: Add AMCC Arches board support (dual 460GT) > ppc4xx: Add static support for 44x IBM SDRAM Controller > ppc4xx: Add routine to retrieve CPU number > > Dirk Eibach (1): > ppc4xx: Add GDSys neo 405EP board support > > Niklaus Giger (1): > ppc4xx: Update configs for Netstal boards > > Stefan Roese (2): > ppc4xx: Correctly setup ranges property in ebc node > ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL > setup > > MAINTAINERS | 4 + > MAKEALL | 2 + > Makefile | 6 +- > board/amcc/canyonlands/bootstrap.c | 12 ++ > board/amcc/canyonlands/canyonlands.c | 140 +++++++++++++++++++ > board/amcc/canyonlands/init.S | 17 +++ > board/gdsys/neo/Makefile | 51 +++++++ > board/gdsys/neo/config.mk | 24 +++ > board/gdsys/neo/neo.c | 101 +++++++++++++ > board/gdsys/neo/u-boot.lds | 132 ++++++++++++++++++ > cpu/ppc4xx/44x_spd_ddr2.c | 71 +++++++--- > cpu/ppc4xx/cpu.c | 19 +++- > cpu/ppc4xx/fdt.c | 45 ++++--- > include/asm-ppc/ppc4xx-ebc.h | 31 ++++ > include/configs/amcc-common.h | 17 ++- > include/configs/canyonlands.h | 222 +++++++++++++++++++++++++++--- > include/configs/hcu4.h | 100 ++------------ > include/configs/hcu5.h | 118 ++-------------- > include/configs/mcu25.h | 94 ++----------- > include/configs/neo.h | 231 ++++++++++++++++++++++++++++++ > include/configs/netstal-common.h | 255 > ++++++++++++++++++++++++++++++++++ > include/ppc440.h | 3 + > include/ppc4xx.h | 3 + > 23 files changed, 1368 insertions(+), 330 deletions(-) > create mode 100644 board/gdsys/neo/Makefile > create mode 100644 board/gdsys/neo/config.mk > create mode 100644 board/gdsys/neo/neo.c > create mode 100644 board/gdsys/neo/u-boot.lds > create mode 100644 include/configs/neo.h > create mode 100644 include/configs/netstal-common.h
Done, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] This is now. Later is later. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot